Mud-club

Vehicle & Technical => Series Land Rovers => Topic started by: reriessandlover on June 28, 2007, 23:20:47

Title: series3 bulkhead and chassis
Post by: reriessandlover on June 28, 2007, 23:20:47

thinking of selling a series 3 chassis all patched up stripped to bare steel and painted with some ace paint (just like the stuff they paint pylons with) :D  . also a tdi bulkhead which has been converted to fit the series 3 chassis all good no rot any body have an idea as to how much they are worth
 :?:  :?:
forgot to mention its a swb

Title: series3 bulkhead and chassis
Post by: Spyderman on June 29, 2007, 09:34:41

Give you a tenner

Title: series3 bulkhead and chassis
Post by: reriessandlover on June 29, 2007, 10:09:35

sold      NOT!

Title: series3 bulkhead and chassis
Post by: screwy on June 29, 2007, 20:44:18

I wouldn't think they are worth much TBH, but you never know! Try selling it and find out, best place is the inevitable eBay....

If I had gone to the trouble of stripping a landy down to replace the chassis, I would never buy a secondhand one regardless as it seems kind of pointless. However, if someone's desperate to get their motor rebuilt and cannot afford a new one I suppose it would make sense.

Good luck anyway! :wink:

Title: series3 bulkhead and chassis
Post by: reriessandlover on June 29, 2007, 20:55:45

thanks for that but what about the bulkhead that got to be worth something

Title: series3 bulkhead and chassis
Post by: philbert on June 29, 2007, 21:11:13

tdi bulkheads can be had new for £160 so a 2nd hand one is not worth a lot.

Title: series3 bulkhead and chassis
Post by: reriessandlover on June 29, 2007, 21:47:47

not according to flea bay 250 plus thats not moded for series either