Mud-club

Vehicle & Technical => Range Rover => Topic started by: sardonicus on June 30, 2007, 00:41:42

Title: overdrive on LT95
Post by: sardonicus on June 30, 2007, 00:41:42

As ive got a 4sp lt gear box ,was wondering how much difference a fairey overdrive would make to m.p.g.and engine noise.even 2% improve ment in m.p.g.would be good on a v8!
Is it possible to fit without taking the floor up?and is there a past posting /website on fitting one?
thanks

Title: overdrive on LT95
Post by: jjsaul on July 02, 2007, 09:07:07

not sure about fitting one in a RRC as regards removing bits of floor etc but we have one fitted on our early 110.
it makes it a *bit* quieter on motorways when cruising, and probably helps the fuel economy a little bit. i guess it comes down to how many motorway miles you do.
if you buy one make sure you get all the bearings and shims and gears etc to fit it onto the mainshaft on the LT95 box...
drop me an email (addy in signature) if you have any more specific questions  :)

Title: overdrive on LT95
Post by: sardonicus on July 02, 2007, 20:54:39

Thanks,will do .
By the way ,the person who was asking about what an overdrive was worth ,took the advice of our black and white stripey friend and sold it for £150 on eblag!  :x  :) Out of my price range i'm afraid!

Title: overdrive on LT95
Post by: jjsaul on July 03, 2007, 09:31:40

Prices of them seem to be going back up...we bought ours for about £40 a few years ago and that was about the going rate at the time.
The value of LT95 'boxes is also in the increase.

Title: overdrive on LT95
Post by: Range Rover Blues on July 03, 2007, 14:41:46

It's almost worth just fitting a 5 speed, but you have to swap the floor panel IIRC.

I have seen RRC with overdive and I think it fits without a floor mod, other than an operating handle :?

Title: overdrive on LT95
Post by: SebastianW on October 21, 2007, 19:44:45

What are overdrives (in their physical form). Are they just a box that adds another gear, that bolts on between the T/box and the differential?

If it is just like another gear, roughly what is the ratio compared to, say a 4sp auto?


Thanks,
Sebastian

Title: overdrive on LT95
Post by: jjsaul on October 23, 2007, 16:57:10

http://www.expeditionlandrover.info/gear_ratio.htm#earlycoiler

that gives ratios for the LT95 box...cant find ones for the O/drive anywhere though...