Mud-club
Vehicle & Technical => Discovery => Topic started by: Oz on July 21, 2007, 14:44:21
-
Hay guys i got a 300tdi and would like to lift it 2inch what kit should i get... and what am i gonna need to get every thing working properly eg: stiring etc
Ceers guys
-
Just put springs and shocks on first. then go from there. Some disco's dont need anything done to the steering.
I had blue springs (bearmach I think) with pro comp shocks. Had no problems.
Its still in aldershot if you want to see it.
-
Ok well ill see how it goes sounds good tho
-
Just put springs and shocks on first. then go from there. Some disco's dont need anything done to the steering.
I had blue springs (bearmach I think) with pro comp shocks. Had no problems.
Its still in aldershot if you want to see it.
Agreed i went with a set of Yellow springs and ES9000's, no problems at all. I will put some longer brake hoses on it before it goes serious offroding though
-
Any ideas what kit i should get and where from?
-
It depends what you want the 2" lift to do, if its just to improve departure and break over angles then just a set of lift springs will do that. If you want to increase your articulation then the Gwyn Lweis challenge kit does very nicely taking you turther than typical +2 damper setups will whalst still using the standard bumpstops.
-
Cheers... im after both really?
-
For various reasons I got the springs first and fitted then running them for a while before deciding on the gwyn lewis setup, which can be used with pritty much any springs. You don't have to do it all at once.