Mud-club
Vehicle & Technical => Discovery => Topic started by: narked on July 31, 2007, 18:04:43
-
Whilst replacing my headlamp connectors today, I discovered I have a strange (to me anyway!) problem. It was happening with the old connectors, but I had put that down to them being half melted.
Ignition off, lights on dipped beam, both lights on as normal.
Ignition off, lights on full beam, both lights on full beam.
Ignition on, lights on dipped beam, both lights on as normal.
Ignition on, lights on full beam, passenger side light on full beam, drivers side dimly illuminated.
Both lights seem to work as they should when just flashing full beam.
Anyone got any ideas?
-
i think you will find its a bad earth on the dim side
-
SAME HAPPENED ON MY DISCO I CONNECTED AN EXTRA EARTH TO THE LIGHT CIRCUIT
-
Ta, will look into that tomorrow then.