Mud-club
Vehicle & Technical => Discovery => Topic started by: doris on August 12, 2007, 21:33:58
-
Hi All
I have won a set of 'excellent condition' grey velour seats from a 1995 soft dash rangey, which I want to use to replace the woeful, knackered efforts in my Disco.
I am led to believe that the rear bench just bolts into the existing holes used by the Disco effort. But that the front ones need a plate making up to fit the Disco runners.
Anybody done this? Any Tips? Any measurements for the plates??
Damon[/img]
-
If you find out let me know......
-
I put some electric heated leather seats in my commercial. I made up new frames for the front as they are loads wider than the 200 ones. Also the armrests foul the centre console so they don't go down properly.
Having said that they are seriously comfortable so were worth the effot getting them in!
-
try this link from a recent thread, if i remember has a good write up of how to fit Rangie seats to a Disco, it has me watching Eblag now :lol:
oops the link LOL Is here lol (http://www.4x4response.net/fforum/index.php?topic=284.0)
-
If you are after a set of Range Rover cloth seats drop me a PM.
-
If you are after a set of Range Rover cloth seats drop me a PM.
Thanks, but i am going for a leather set, easier to keep clean with the dog, kids..... me.... :lol:
-
If you are after a set of Range Rover cloth seats drop me a PM.
Thanks, but i am going for a leather set, easier to keep clean with the dog, kids..... me.... :lol:
Plenty of em on ebay they tend to go for around the £100/130 mark.