Mud-club

Vehicle & Technical => Discovery => Topic started by: SteveGoodz on August 19, 2007, 12:30:49

Title: Front fogs not working
Post by: SteveGoodz on August 19, 2007, 12:30:49

MOT is due soon and I noticed t'other night that the front fogs weren't working. So, printed out the circuit diagram from the manual and got me tools ready ... then noticed there aren't any front fog light  :shock:

Confused, or what?

Title: Front fogs not working
Post by: sub4x4 on September 01, 2007, 15:47:46

may be u left them on the kitchen floor lol
well mine just past its mot and mine look like somebody just taken a dump in them lol and they dont work. r they a sealed unit or can the bulbs be changed , and wots the thin pipe for ???? :!:

Title: Front fogs not working
Post by: hobbit on September 01, 2007, 19:09:16

MOT dont test front fogs, only rear :wink:

Title: Front fogs not working
Post by: sub4x4 on September 02, 2007, 00:03:25

hi kev hows the stretch disco still going ok ?

Title: Front fogs not working
Post by: sub4x4 on September 02, 2007, 14:54:35

looking at the spots from under neath ? i can see the wireing but wot is the little pipe thing for ????

Title: Front fogs not working
Post by: hobbit on September 02, 2007, 15:26:48

Disco still running, just insured it for another year, doing an engine and box swap soon :wink:

That pipe hanging down isn't for the headlight washers is it?

Title: Front fogs not working
Post by: sub4x4 on September 02, 2007, 15:47:49

no m8 its a small thin one that gose into the rear ov the spot ?

Title: Front fogs not working
Post by: landroverkeith on September 02, 2007, 17:23:08

is it not trunking covering up some wiring ?? its been a while since i looked at the fogs in my old bumper

Title: Front fogs not working
Post by: sub4x4 on September 02, 2007, 20:25:57

no u got the trunking then wot looks like a thin 2/3mm thick pipe

Title: Front fogs not working
Post by: hobbit on September 02, 2007, 22:50:28

Try to track it back through the bulkhead, wonder if it could be a breather pipe from maybe the front axle or elsewhere

Title: Front fogs not working
Post by: dave_2A_2.25Turbo on September 02, 2007, 22:56:02

Nah - all the 200/300s have em.  Its a vent for the foglight - presumably to stop them steaming up/rusting.  Or rusting quicker...

There's 2 on each light.

Title: Front fogs not working
Post by: SteveGoodz on September 03, 2007, 23:57:01

Anybody got a Disco 1 front valance and fog light they want to sell?