Mud-club
Vehicle & Technical => Discovery => Topic started by: nickW on August 30, 2007, 11:43:55
-
(http://img440.imageshack.us/img440/1613/mudtyre2smallgr0.jpg)
do these fit on an F reg disco
-
Er... F reg?
Considering the earliest Discovery's are G - are you sure it's really a Discovery and not a reshelled RR?
However - they look like standard LR alloys, so assuming you have discs all round - they'll fit. Can't see tyre size, so weather they'll rub I cannot say. But the rims will fit.
If it's a REAL F reg Discovery it's very unique!!!!
-
(http://img440.imageshack.us/img440/1613/mudtyre2smallgr0.jpg)
do these fit on an F reg disco
Dunno, they fit a 200 TDiS ok, thats whats on mine anyway.
-
it might actually be a G reg its 89
its not for my disco, these came off my 91 disco but these person who's intrested in them wasnts to fit them to a 89 disco and he just wants to know that they will fit
thanks
nick
-
89 - 94/95 is 200Tdi
94/95 - 98 is 300Tdi
Both crossover years have dual running styles. All Discovery 1's (200 and 300) have the same axles and PCD. Therefore they will fit.
-
it might actually be a G reg its 89
its not for my disco, these came off my 91 disco but these person who's intrested in them wasnts to fit them to a 89 disco and he just wants to know that they will fit
thanks
nick
Should fit no problem, designed for 200 series discos the 'Turbine' shape to go with the TDi
-
Discos all had the later axles, the only thing they won't fit is 200TDi Defnders and early RRC. Check the ends of the studs for either a traingle or a "-" stamped into the stud, this denotes the correct hub for alloys and they are all interchangeable and have roughly the same PCD so you don't need a matching spare wheel.
-
the should fit an g reg, but that shap alloy dose NOT fit 24 spline axles. You need 10 spline, with dome headed half shafts. My dad found this out the hard way when he bought a 90 with them on and one fell off, and no it was not just the short studs.
-
That's odd, becasue I've had them on my LSE and that's 24 spline. If anything I would have said the 24 spline had more clearneace at the driveshaft end is much flatter than the old 10 spline halfshaft. The ones they don't fit are 200 TDi Defender shafts, go on, ask me how I know :roll: