Mud-club

Vehicle & Technical => Defender => Topic started by: BigSi on September 04, 2007, 23:20:57

Title: How high does yours sit?
Post by: BigSi on September 04, 2007, 23:20:57

Just our of interest, how high does your 90 sit when measured from the ground to the bottom of the front/rear plastic wheel arch?  :shock:  :shock:  :shock:  :shock:

Title: How high does yours sit?
Post by: extreme90 on September 05, 2007, 00:06:13

really, you cant measure from there, as people all have different tyre sizes and lifts

the wat to measure is from the center of hub to the spat to measure a lift
dan

Title: How high does yours sit?
Post by: BigSi on September 05, 2007, 07:57:51

Good thinking......didn't think about that (running 265/75 R16)!!! Ok, from the centre of the hub to the bottom of the spat!  :lol:  :lol:  :lol:  :lol:

Title: How high does yours sit?
Post by: Nobber on September 05, 2007, 19:30:56

these are 265 70 16.

(http://i84.photobucket.com/albums/k9/robertgilmore/IMG_0279.jpg)

Title: How high does yours sit?
Post by: davidlandy on September 05, 2007, 20:53:09

39"

from the floor to the bottom of the wheel arch

this is from memory so could be wrong!

Title: How high does yours sit?
Post by: extreme90 on September 05, 2007, 21:58:35

mine sits ate 40 inch from ground to bottom of spat, but thats because of my lift and simex
so really, you do need measurements from center of hub to spat

what is the reason for asking  :?
dan

Title: How high does yours sit?
Post by: BigSi on September 05, 2007, 22:04:27

Just wanted to see what the actual height of the lift fitted to the 90 was? I was going to measure mine, but its dark now!

Title: How high does yours sit?
Post by: extreme90 on September 05, 2007, 22:18:39

so you need a measurement off a std 90 hub to spat
and do the same for yours
try mud club matty, his 90 is on std suspention
dan