Mud-club
Vehicle & Technical => Range Rover => Topic started by: carls200tdi on September 10, 2007, 20:46:30
-
:shock: WHAT OIL SHOULD I USE IN MY GEAR BOX AND TRANSFER BOX :shock:
RANGE ROVER 2.5 VM DIESEL
GEAR BOX LT77
TRANSFER BOX BORG AND WARNER (VISCOUS COUPLING)
THANKS CARL
-
i'm not sure will check with a mate of mine then let you know 'i've asked him once for myself but can't remeber' i must be getting old!!!!!
simon
-
LT77 takes AFT (automatic transmission fluid), though not sure about the borg warner.
-
most transfer boxes take EP90...but check before putting some in.
these kinda details should be in the haynes manual if someone has one to hand?
-
ATF in both, or use Difflock Evo in the LT77 but the BW needs ATF. :lol:
-
Borg-Warner uses ATF.
The Haynes guide has an error in it stating that EP90 goes in a Borg-Warner box. I pointed this out and they will correct in the next edition if there is one
My copy of the RAVE CD specifies ATF Dexron IID
-
thanks guys going to change fluids in the next week or so
-
Th B-W will run fine on EP90, ask me how I know :roll:
-
how do you know
-
He's probably the same as me and ran with EP90 for a few years. I now put ATF in mine
-
Bingo, I too belived the haynes book of confusion when we first had a RRC, having been spoilt by how good a manul Haynes do for classic Fords :roll: