Mud-club

Chat & Social => The Bar - General Chat => Topic started by: woody on September 17, 2007, 21:46:00

Title: lights fault
Post by: woody on September 17, 2007, 21:46:00

both rear flashers went US last week
traced the fault

bulb holders have been replaced from main steelers at a very reasonable price of £2.04 each

the problem with one of the lights is the plug that goes into the bulb holder is corroded

the main steelers don't sell the plug but can offer me a link wire off a defender with the same plug on for £11 +vat

so come on whats the cheaper alternative

Title: lights fault
Post by: Lee_D on September 17, 2007, 21:48:12

Cut off plug.

fit bullet connectors.  :)

Title: lights fault
Post by: woody on September 17, 2007, 22:28:19

the terminals are very very very small
not seen connectors that small

Title: lights fault
Post by: lambert on September 17, 2007, 22:55:07

Be environmentaly sound, visit a scrap yard! :D

Title: Re: lights fault
Post by: Porny on September 17, 2007, 23:10:05

Quote from: "woody"

both rear flashers went US last week
traced the fault

bulb holders have been replaced from main steelers at a very reasonable price of £2.04 each

the problem with one of the lights is the plug that goes into the bulb holder is corroded

the main steelers don't sell the plug but can offer me a link wire off a defender with the same plug on for £11 +vat

so come on whats the cheaper alternative

I could make you a lead for for £5.50 including postage...  just need to cut your old plug off, and connect the two new wires to your old ones.


Ian

Title: lights fault
Post by: Ralph on September 18, 2007, 23:13:52

Just solder two wires onto the pins and then fill it all in with clear silicone sealant then join on to original harness