Mud-club

Vehicle & Technical => Discovery => Topic started by: Steven on September 21, 2007, 12:38:23

Title: SS Rear Exhaust
Post by: Steven on September 21, 2007, 12:38:23

Does anyone know where I can get a Stainless steel back exhaust for our 300tdi 98 Disco? Can't find one anywhere...
Thanks in advance  :wink:

Title: SS Rear Exhaust
Post by: auf_wiedersehen_pet on September 21, 2007, 14:22:26

Try the usual ones like Rimmer Bros or try the link.

http://www.longlife.co.uk/performance/locator.default.aspx

They remove yours and build one to match - only snag, the closest to you is Leeds!

As they build it/fit it you can be sure it works. I've had to take a hacksaw to two different sets of pipes sent to me in the post before.

Title: SS Rear Exhaust
Post by: ross501 on September 21, 2007, 19:01:32

just put a stainless one on mine today
www.stainlesssteelexhausts.co.uk

Title: SS Rear Exhaust
Post by: Steven on September 23, 2007, 20:35:04

Can't find any, anywhere!
Rimmer bros don't do just the back on its own.  :(

Quote

just put a stainless one on mine today
www.stainlesssteelexhausts.co.uk

Was this a complete set or the rear like what I'm after?

Title: SS Rear Exhaust
Post by: ross501 on September 23, 2007, 20:58:04

if you call them they will do what you want i had the middle and rear my brother had just rear

Title: SS Rear Exhaust
Post by: Steven on September 23, 2007, 21:02:30

Quote from: "ross501"

if you call them they will do what you want i had the middle and rear my brother had just rear

Cheers matey.
 :wink:

Title: SS Rear Exhaust
Post by: boss on September 28, 2007, 13:00:11

will a td5 exhaust fit a tdi?

Title: hi steve
Post by: mentalmoshio sophs V8i on September 28, 2007, 13:31:45

steve

if u want a custom look try

www.essexracing.co.uk

they fit the exhuast also cheap as well there based in london.

it gives a real meaty look. mate had a twin dtm one but was no noisier

everything is made from s/s steel

Title: SS Rear Exhaust
Post by: Steven on September 28, 2007, 14:09:05

These back boxs with nice exsits on them, how do they conect and where to??? Would I need to cut my original back box or something?

Title: SS Rear Exhaust
Post by: mentalmoshio sophs V8i on September 28, 2007, 14:35:43

where ur back box is now . u could use the mount there  by weld a hanger from the new on one cut the pipe back to allow a enough room for a flexi pipe joint from

www.demontweeks.co.uk for 25 quid but they do wear

and retain the normal exhuast system from the manifold to the point where u cut it.

or have a s/s pipe bent from the middle box.

you could have this done at

www.essexracing.co.uk fitted your lookin at 50 quidish

if u fancy building yourself use

www.jetexexhaust.co.uk

they have every bit u need

it all depends how hands on u are and tool to use . u have

Title: for a compeition look
Post by: mentalmoshio sophs V8i on September 28, 2007, 14:46:17

check this out

http://www.4x4-r-us.co.uk/exhausts.html

or look at my disco in the gallary. the basic pipework is for a tdi