Mud-club

Vehicle & Technical => Range Rover => Topic started by: Rangierover on September 30, 2007, 19:51:27

Title: Stuck in difflock
Post by: Rangierover on September 30, 2007, 19:51:27

Hi my range rover has got the crysler 3 speed auto init and ive had it for about a month and a half and have done a bit of offroading and it all went ok and then brought it home and as you turn a coner on full lock either way it makes a bit clunk, and i have been told that it is stuck in difflock but havent been told how to get it out of difflock the lever moves ok, it always did moves easily but it just doent take it out the light goes out but doesnt disengage was wondering if anyone could help me?

thanks

Title: Stuck in difflock
Post by: L90OOK on September 30, 2007, 20:36:51

Try putting it into reverse & gently rocking it on the throttle.  :wink:

Title: Stuck in difflock
Post by: Rangierover on September 30, 2007, 20:38:49

ok will do if it doesnt work, anything else i should try?

Title: Stuck in difflock
Post by: hairyasswelder on September 30, 2007, 22:15:32

jack up the wheels and see if they spin?
Diff may be 'wound up'
Worked on mine but you need to chock the wheels and put in neutral, handbrake off, not the usual way or the safest, be carefull  :wink:

Steve

Title: Stuck in difflock
Post by: Rangierover on October 01, 2007, 22:09:53

OK will try that 2mo nite and thanks for the help!


Ali