Mud-club

Vehicle & Technical => Range Rover => Topic started by: buckshot on October 05, 2007, 21:54:25

Title: gearbox filler plug
Post by: buckshot on October 05, 2007, 21:54:25

hi,i have an old 1976 range rover with a 4 speed box and want to check the oil level,i have found one filler plug under a gromit on the tran,s tunnel but can,t find anymore.can anyone tell me were to look please for the other one.thanks.

Title: gearbox filler plug
Post by: DEANO3528 on October 07, 2007, 21:59:15

If you have no dipstick at the top, then you need to remove the level plug from underneath. It's a big plug on the left hand side of the main box if memory serves, Similarly, if there is no filler hole on top accessed from the tunnel, the transfer box level/filler plug is on the back next to the PTO cover. 20/50 engine oil for both boxes.

Title: gearbox filler plug
Post by: sardonicus on December 30, 2007, 14:37:57

I'm changing the oil in the gearboxes on my rangie and cant find a filler for the main gearbox.according to haynes , its on top just behind the gear lever.....
can i fill it through the gear lever hole if i remove it?
otherwise i cant see how to get oil into the level plug hole as there s no room.
Its a later 4sp. LT95.
Anyone?

Title: gearbox filler
Post by: buckshot on December 30, 2007, 16:09:52

hi,yes you can fill it through the gearlever but you have to guess at quantity.if you fill it through the level hole which is just above the drain plug and about 3" towards the rear of the gearbox you get the right amount in.its an awkward spot to get at i used a holesaw on the gearbox tunnel and the put a rubber bung in it ,hope this helps.

Title: gearbox filler plug
Post by: sardonicus on December 30, 2007, 16:32:11

Thanks for that suggestion of the hole and rubber bung,may do it when i've got time.willjust fill it through the gearlever hole for now,'till it runs out the level hole.about 2 1/2 litres i think. :)