Mud-club
Vehicle & Technical => Defender => Topic started by: benspray on October 10, 2007, 12:51:25
-
Bit of an enquiry at this stage, Im looking to put a 200tdi into my 90 at some stage in the future, I would really prefer a defender engine to a disco one.
How much do they go for - id obviously need the engine, anciliries, rad and intercooler, airbox, all the pipework etc etc - ie enough to allow me to do a straight swap with my existing 2.5nad
I currently dont have the space at home to that level of work on the 90 so it would be loaded up with all the parts, driven to a mates farm and hopefully everything swapped over in a day or so - hence wanting all the parts there and worst case if a part is broken or something its an easy trip to the nearest dealer to get a replacement without having to make / modify parts.
Im assuming that the tdi rad etc will drop in or do I still need to mod the mountings like when using the disco rad etc?
anything else I should watch out for? Im assuming I'll still need to swap the back plates over or drill and tap etc as per the disco swap?? or not with the defender version?
Cheers
-
Defender 200 TDI will drop straight in to your 90.
Rad's a straight swop to.
Adrian
-
Nice thanks,
as the 200tdi will no doubt have a PAS pump fitted what would be involved in fitting PAS while Im at it - and while I have a nice big hole in the engine bay to access everything...
again using standard defender parts if poss.
my 90 is a 1988 ex military spec so no PAS and no power hence thinking about swapping from the NAD.
Cheers
-
Mine was a standard 90 & when i did mine i got everything including the power steering box, it all just swaps straight over - you just need to clip the pipework to chassis etc..
Take some photo's of the defender's engine bay before you remove all
the bits & then just re-fit.
Adrian
-
Cool cheers..
Been looking but cant really find any engines for sale, anyone know where to look / how much they go for?
Cheers
-
I have a Disco one if you don't find a Defender one
-
Ben
Where are you in the country? :-s
-
Sorry I will fill my profile in.. :-)
Im in south Norfolk (norfolk suffolk border)
Dont mind travelling when the time comes if someone has one for a good price ;-)
Cheers
Ben
-
theres a chap in wrexham that does fully reconned defender engines for around the 1100 quid mark.........i believe he's on ebay aswell..........i'll see if i can find a link to his site later
-
Is there much difference between a defender 200tdi engine and a disco one in the way of rads , turbos ,intercoolers etc.am considering fitting one to a RR classic.(will post in RR forum,but you chaps seem to know what you're talking about).
Thanks.
-
Is there much difference between a defender 200tdi engine and a disco one in the way of rads , turbos ,intercoolers etc.am considering fitting one to a RR classic.(will post in RR forum,but you chaps seem to know what you're talking about).
Thanks.
Main diff as far as I can see is the turbo's location, the disco version (and all the ancils) is better suited to RR fitment IMHO.
-
Guys, I really need a union for the PAS pump, the outlet/high pressure hose has a banjo type fitting on it and the back of the PAS pump has a hole, but I dont have the union or whatever to connect it up..
anyone got one?
Cheers
-
you might wanna try a plumbers merchants...they always have a massive range of that kinda stuff..
-
Well, went to several hydralics type places and no where had one, had to buy a new pump to get the part so that I could take pics and compare etc, just hoping I can find one so I can take teh £130 pump back and get my money back on it..
Heres the part, the dimensions are the diameter of the sections of the bolt (not the length) hopefully the link will work
http://www.photobox.co.uk/album/album_photo.html?c_photo=112042442
Anyone got one or a used PAS pump that I can buy?