Mud-club

Chat & Social => The Bar - General Chat => Topic started by: andrew2986 on October 19, 2007, 20:49:43

Title: Question for thrasher !!
Post by: andrew2986 on October 19, 2007, 20:49:43

Hi thrasher,
Didnt want to hijack the bonnet pin thread, but noticed on one of your pics what looked like a winch remote socket next to the bonnet pin, is that so? do you just pop the bonnet plug the winch in and close the bonnet?
been wondering where to put the remote socket for my winch.

Andy

Title: Question for thrasher !!
Post by: Thrasher on October 19, 2007, 20:57:58

Ah ... no - it's actually my winch cut off :) As we are all aware you shouldn't drive with the winch energised. So my winch won't go until the key is placed in the cut off.

Not a bad idea to put a remote socket there too there .... hmmmmm

Title: Question for thrasher !!
Post by: Jake on October 19, 2007, 21:24:47

I have pne of those too
(http://members.mud-club.com/galleryimages/73129ae0d28cae24c675ca3cbf73d982.jpg)
But mines for the plug in lead power from my second battery
 8)

Title: Question for thrasher !!
Post by: andrew2986 on October 20, 2007, 08:18:24

Cheers for that,
was also wondering where to put the isolator as well !!
Theres not much room in the engine bay with a V8 on gas !
Andy

Title: Question for thrasher !!
Post by: Bulli on October 20, 2007, 08:47:24

see if you can get a warn solenoid, got one from ebay for about 25 quid. i have an aircraft switch on the dash. the winch is dead till i throw the switch, saves getting out if you have a WB on board :wink:

Title: Question for thrasher !!
Post by: Thrasher on October 20, 2007, 10:25:53

I had one of those - it isolated my engine one time to many so I disconnected it. It's in the garage somewhere....

Title: Question for thrasher !!
Post by: Bulli on October 20, 2007, 13:41:47

hmmmm, see if you can find it....