Mud-club

Vehicle & Technical => Defender => Topic started by: Elmo on October 20, 2007, 15:59:21

Title: What pressures muds on a 110?
Post by: Elmo on October 20, 2007, 15:59:21

I have 4 265/75/16 BFG muds on steel rims on the way to me from t'interweb (D44), just wondering what a reasonable compromise pressure for tarmac and mud would be?

Vehicle is a 110CSW 2.5D nothing exceptionally heavy bolted to it and I don't tow.

Advice anyone?

Title: What pressures muds on a 110?
Post by: L90OOK on October 20, 2007, 16:07:26

I run mine 36 on front, 38 rear when empty & 40 front, 42 rear when laden or towing  :wink:
Just can't wear the BFG Mud Terrains out either  :D

Title: What pressures muds on a 110?
Post by: Elmo on October 20, 2007, 16:09:04

Cheers thanks for that :)

Title: What pressures muds on a 110?
Post by: TDi90 on October 20, 2007, 16:44:36

i run 28 front and 30 rear Rob

Title: What pressures muds on a 110?
Post by: Wolfie on October 20, 2007, 19:11:09

When I got my first set, the advice I got (via a friend) from the BFG importer, was to run the at about 5psi above standard. So usually run 35psi front 45psi rear, increasing rear to 50 when towing the other car about. Seems to work pretty well for me, even tyre wear and >50k miles per set of tyres.