Mud-club

Vehicle & Technical => Discovery => Topic started by: stevepage3 on October 22, 2007, 14:14:54

Title: Disco 1 front body mounts
Post by: stevepage3 on October 22, 2007, 14:14:54

I have a disco 1 3.5 v8 1991, the area around the front body mounts is
badly corroded,a nd I need to replace the body mount rubbers, does anyone know where you canby these from and if they have a standard part number.

Thanks

Steve

Title: Disco 1 front body mounts
Post by: hobbit on October 22, 2007, 16:50:24

If you are any good with a welder, you can fairly easily cut out the old mountings, and either source pre fabbed replacements or cut away some from a scrapper, and weld them in

I had to replace a headlight corner unit, after removing the rad, it was fairly easy to cut away the whole front corner are replace it, but if you only need to do the mountings not such a big job