Mud-club

Vehicle & Technical => Discovery => Topic started by: defuzz on October 25, 2007, 15:24:07

Title: Exhaust Help
Post by: defuzz on October 25, 2007, 15:24:07

Hello, I need a new rear box and want to check I order the right bit.


1990 registered 200TDi 3 Door Discovery


The bit I just ordered from local car place ( I can easily cancel if its wrong) is LR111J

Can someone confirm is this right? or point me to where I can correctly identify what I need (old exhaust is long gone I'm afraid so no getting numbers from it!)



Also, before I fit, is it worth painting or rust proofing the exhaust to extend its life?  If so what with?

Title: Exhaust Help
Post by: DEANO3528 on October 25, 2007, 15:44:42

Up to GA460229 needs pt no NRC7119

From GA460230 to KA the LR pt no is ESR238 but is for both silencers.

BOSAL catalogue quotes the no 286-823 for the rear box on the later model no.

HTH

Title: Exhaust Help
Post by: clbarclay on October 25, 2007, 18:00:25

Is the local car place getting you a genuine one or some other brand/unbranded, it may easily be a non genuine exhaust part and have a different part number.

Title: Exhaust Help
Post by: Ja1983 on October 25, 2007, 20:47:49

..if you want one to last,  the best bet is have a stainless made.. or bought off ebay!  8)

Title: Exhaust Help
Post by: DEANO3528 on October 25, 2007, 21:10:32

LR111 is a Timax part no. and corresponds to NTC7119 all models to 93.

It is for the rear silencer and includes the length of pipe to the centre box