Mud-club
Vehicle & Technical => Discovery => Topic started by: strapping young lad on January 16, 2005, 20:11:40
-
hello
whats the feasibility of remounting the seatbelt mount where the catch is on?
currently no babyseat will fit safely in the rear of mine due to the length of the webbing
sorry i mean front facing seats.. if mothercare say no, i will believe them
halfo... on the other hand said any seat will fit :evil:
anyway
if the mounting can be moved back a couple of inches this means the seat can be mounted in the rear
HOWEVER
safety aspects come into play.. so i want feedback
ta
d
ps its a "wouldnt mind having" but at NO cost to my son's safety
-
The rear belt mounts are on brackets which bolt through the floor panel onto a chassis attachment.
You could relocate them by moving / fabricating the chassis attachments, but you want to be sure about the quality of the welding.
What effect this would have on your insurance I don't know.
-
thought as much
alternatives?
i had though about moving forward the rear seat too
-
In the back of the Bobtail I don't have any seatbelts,
I've fitted Liams seat in with a couple of small ratchet
straps and it's a securer fit than in the back of the
Discovery with the proper seatbelt being used.