Mud-club

Vehicle & Technical => Discovery => Topic started by: denviks on November 28, 2007, 16:46:37

Title: ming has a rack
Post by: denviks on November 28, 2007, 16:46:37

well i have swapped the rack over from the old 200 tdi disco that i am breaking. i have re arranged all the stuff on the rack so it sits better too. its all wired up now too and working. :wink:

(http://photos.imageevent.com/denviks/ming/mingupdates/websize/dfsd%20_10_%20_Small_.JPG)

(http://photos.imageevent.com/denviks/ming/mingupdates/websize/PC080005%20_Small_.JPG)

(http://photos.imageevent.com/denviks/ming/mingupdates/websize/PC080008%20_Small_.JPG)

(http://photos.imageevent.com/denviks/ming/mingupdates/websize/PC080011%20_Small_.JPG)

(http://photos.imageevent.com/denviks/ming/mingupdates/websize/dfsd%20_12_%20_Small_.JPG)

Title: ming has a rack
Post by: manchap on November 28, 2007, 17:43:08

very nice

Title: ming has a rack
Post by: Mr Alford on November 28, 2007, 19:40:22

looks the business how much did it set ya back initially?

Title: ming has a rack
Post by: andyhubbard on November 28, 2007, 19:47:34

Is that rack of off a 90 or 110 mate.

Title: ming has a rack
Post by: denviks on November 28, 2007, 19:55:51

i believe it was off a 90...its a brownchurch. bullfrog moved all the legs around re welding them into place, then moved the top around so that the rear sunroof would open to.  :wink:
i have boarded it out and added the waffles etc .... wouldnt like to think how much its cost  :lol:  :lol:

Title: ming has a rack
Post by: denviks on November 28, 2007, 19:59:17

here it is again but the pic was taken while laying everything out ,,,,,

(http://photos.imageevent.com/denviks/ming/mingupdates/websize/PB230039%20_Small_.JPG)


will give you a better idea on how it was moved about

Title: ming has a rack
Post by: landroverkeith on November 29, 2007, 15:56:17

That looks a very neat setup indeed

can I ask how u secured the waffels and ammo boxes down plz?

I have a set of each and there just smashin about in the boot, my roof rack is already boarded out a lovely saftey devices one

Title: ming has a rack
Post by: denviks on November 29, 2007, 16:08:37

i have bolted the boxes down through the rac and boarding mate using massive washers..... inside the boxes and under the box.....also i have bolted through the side of the rack and boxes too....i dont want to knock them off.

the waffles are mounted down with a bolt through the boarding. it is bolted both sides with big washers again and then the waffle goes over this....big washer on top of the waffle board with a wing nut ontop. there is 1 at each end of the boards.....so 4 in all. i have then run a cycle lock through the waffles and locked them to the roof.

i hope this has made scense...it did while i was typing it  :lol:  :lol:  :lol:

Title: ming has a rack
Post by: landroverkeith on November 29, 2007, 16:11:41

:lol:  lol yes ty perfect sense  :lol:  time for me to pay a visit to B&Q then