Mud-club
Vehicle & Technical => Suzuki => Topic started by: MrShogun on November 30, 2007, 19:02:19
-
Well then, bought the vitara about 3 weeks ago i think, first thing i did was put my CB etc on it:
(http://i10.tinypic.com/8543cd3.jpg)
(http://i4.tinypic.com/7y3tgl3.jpg)
Then i went about the suspension lift, got the spacer kit off ebay, bought the rims off ebay for 40 quid and the tyres for 225 fitted! They are 31/10.50/15 Insa Turbo Saharas.
(http://i5.tinypic.com/8fjr2mx.jpg)
The front and rear passenger side went fine, as did the drivers side rear however the front driver side has been a right pain, i compressed the spring as the driveshaft doesnt unbolt from the hub as easily as the passsenger side, slide it in and started to the compressors, one of the jobbies fell off alowing the spring to go to full length, the force of which bloody ripped the driveshaft from the hub:
(http://i3.tinypic.com/7wsxeua.jpg)
Would the CV Joint have gone or something?
Any help?
Other than that it looks pretty cool i think, bit of trimming and bashing, jobs a good un!
Matt
-
Cant see the pic.
I've not taken a zook driveshaft apart but it may be just a matter of reassembling it and fitting a new boot.
-
pic should be there now!
disassembling the hub looks tricky especially as on the of screws has been sheared! :evil:
-
mrshogun
its only a curclip that holds the driveshaft into the hub might just be a matter of fishing that out and pushing back together
simon
-
the circlip is still on the end!
-
only way is to undo your dampner form the hub and the brake caliper and try and get ur shaft out its doubtfull the circlip will ba any use now thou so off to the tat yard me thinks
has it pulled the cv apart?
simon
-
cv looks to be intact no visible breakage, how will i know if i need a new circlip? Still fits round it alright
thanks for the help btw!
-
ive pulled 2 sets of circlips through my hubs and ive not managed to get them to lock 100% afterwards for the sake of a couple of pence
also check for scoring in your hub splines its un-likely but has been done
simon
-
ok thanks, so is the circlip specific to the vitara or is it a universal part?
-
id of thought as long as you get the right diamiter circlip any shud do the trick m8
simon
-
ok mate thanks very much for all the help will have a go at doing it tomorrow if i have time and let you know how i get on!
Cheers
Matt
-
Hummm looking at that pic all i can see is its ripped the circlip out the front off the spline ...somthing i will have to do shortly as ive managed to whip lash my front diff at the weekend on a harsh landing and smashed it to bits ...Doohh back to me shed I thinks :lol:
-
managed to sort it out this afternoon, just about got it in, bit of a bash with a big hammer sorts everything!
Knocked the arches about a bit but still not quite enough space yet, but took her on her first off road foray and was very pleased, however where i unbolted the calipers as two of the bolts required grinding due to rust my brakes are very very poor!
Do the calipers adjust or would the system just need bleeding?
Will get some daylight pictures up asap!
Cheers
Matt