Mud-club
Vehicle & Technical => Discovery => Topic started by: JimsMowing on December 13, 2007, 16:18:58
-
Removed the front disc from ther hub and the inner bearing came out. no prob i thought will put it back when its all cleaned and re greased.
Now i cant remember in what order it goes back and which way round.
DUMMY i know. Anyone got a link or picture of what order they go in or a pdf exploded view?
-
How many seals does it have one or two?
(while I rummage round through the diagrams)
-
Here is the earlier type
up to JA032850 chassis no
(http://i241.photobucket.com/albums/ff182/hobbit874/4x4%20asstd/fronthubexplodedviewtoja032850.jpg)
-
Cheers guys! The old man ended up putting me straight! I'll remember this now! Thanks once again for the replies.
Those exploded views are ace, where can i get something that will give me that kind of information?
-
Cheers guys! The old man ended up putting me straight! I'll remember this now! Thanks once again for the replies.
Those exploded views are ace, where can i get something that will give me that kind of information?
Haynes Manual.
-
Get a copy of the RAVE cd of ebay (useless music-sorry get my coat time) :oops: ,seriously i bought one and not only can you get blown up piccies like this but you can also print out the page and have it next to you on the job,see ya Andy.
-
When stripping something like this out, lay out the parts in order of removal, then if you want you can also photo the layout, cause you or somebody else is bound to trip over them :wink:
I managed to source a spare pair of hubs, stripped them out and new bearings and disks, re assambled them, but when I pulled mine off found that the axle had been changed for a later type hub and they didn't fit :cry:
Had to do it all again