Mud-club
Vehicle & Technical => Defender => Topic started by: tjolliffe on December 25, 2007, 11:18:43
-
Hi all, further to my last post have figured out the whining noise on my 90 is coming from the front diff, can see where it's throwing out oil out of the back of the diff where the prop joins it which prob means bearings are shot aswell (causing whining), sound like a good diagnosis? Going to replace the whole diff, never done it before, do I have to remove the two halfshafts in order to get it out? I'm guessing I do. Any help would be great.
Thanks all.
-
Told you!!!! sorry mate,you shouldnt pay any more than £50.00 for a secondhand diff but MAKE SURE ITS THE SAME RATIO AS THE BACK ONE,I wish id have known ive just slung one out for a 90!!!
-
Yes undo the 4 prop bolts (14mm) and drop the prop down, slide the short stubby halfshafts out,undo all the front hub bolts,slide the hub and halfshafts out about 6 inches (watch the brake lines) undo all bolts around the diff (after youve drained it)and pull the diff out and its a tight fit and v heavy.....good luck :D
-
Cheers BK, is there any way of telling what ratio my back diff is? I'm fairly sure it's standard, think thats 3:5 rite?
-
all coil sprung vehicles are 3.54 ratio
just have to make sure you get the correct spline as there is 2 options 10 & 24 spline
-
If yours is an early 90 itll be a 10 spline (the cheapest!) 24 spline wont fit they are usually from td5,s :D
-
If yours is an early 90 itll be a 10 spline (the cheapest!) 24 spline wont fit they are usually from td5,s :D
not quite
90's & 110s from approx 84-93 are 10 spline
there are some late 200tdis that have 24 spline axles but in general anything from 94 onwards will be 24 spline
-
thought that 300 had 24 spline as well as some 200 ?? :wink:
-
thought that 300 had 24 spline as well as some 200 ?? :wink:
yup
read whote i wrote :lol:
-
thought that 300 had 24 spline as well as some 200 ?? :wink:
yup
read whote i wrote :lol:
you must have posted while i was typing (i am slow at typing)
-
tjolliffes is a 1986 so itll be a 10 spline diff thats what I meant, so go and get a 10 spline diff thats what he needs..........job done :D
-
Cheers guys thanks for the advice, just got to find a diff now, should be an interesting task considering it's Christmas..... :?
-
remember to use new gaskets or sealer to stop leaks on the chrome ball ends and diff
-
http://cgi.ebay.co.uk/LAND-ROVER-10-SPLINE-DIFFERENTIAL-LANDROVER-DIFF_W0QQitemZ180197650216QQihZ008QQcategoryZ31348QQrdZ1QQssPageNameZWD1VQQcmdZViewItem?_trksid=p1638.m118
-
Cheers BK, saw that one, have e-maild him but no response, hoping he's open after boxing day :?