Mud-club

Vehicle & Technical => Discovery => Topic started by: Evilgoat on January 21, 2008, 10:45:26

Title: Crank Pully
Post by: Evilgoat on January 21, 2008, 10:45:26

OK, this is getting boring now  :evil:

Anyone know what size the 4 bolts on the crank pully really are, as they sure as hell arent metric. :evil: :evil: :evil:

Title: Re: Crank Pully
Post by: stageonesimmo on January 21, 2008, 12:02:34

Mr Goat -

According to my old (spare) pulley, a collection of bolts as supplied in the DiffLock puller kit, and my thread gauges.........

M6 (13MM A/F Head size) X 1.25 MM pitch............

There you go.

Ahhhhh, nuts - just noticed its a 200Tdi - sorry cant help - above info is for my 300TDi  :'(

Title: Re: Crank Pully
Post by: Evilgoat on January 22, 2008, 15:12:16

Is off, see other thread :) Thanks everyone who helped.

Title: Re: Crank Pully
Post by: eugene on January 22, 2008, 19:35:29

hi they are ten mm they were on mt 200tdi ive just replaced a shattered pully hope this helps

Title: Re: Crank Pully
Post by: Evilgoat on January 22, 2008, 21:53:32

took a 3/8ths to get them off. They may have been 10mm once but shocking quality bolts.