Mud-club

Vehicle & Technical => Discovery => Topic started by: muddymart on January 29, 2008, 11:46:11

Title: dickie seats
Post by: muddymart on January 29, 2008, 11:46:11

Hi , Will dickie seats out of 200 fit in a 300? im assuming there all the same fittings?  i hope.... ;)

Title: Re: dickie seats
Post by: beast5680 on January 29, 2008, 19:47:44

they are identical i believe but 300 versions have a better range of upholstry, mine are leather :D also check you have the rubber blocks that sit under the carpets, these are the bits people forget about as the leg of the seat sits on these ,if you dont have them it pushes through the carpet and makes the seat tilt down abit

Title: Re: dickie seats
Post by: landroverkeith on January 31, 2008, 15:13:28

Quote from: beast5680 on January 29, 2008, 19:47:44

they are identical i believe but 300 versions have a better range of upholstry, mine are leather :D also check you have the rubber blocks that sit under the carpets, these are the bits people forget about as the leg of the seat sits on these ,if you dont have them it pushes through the carpet and makes the seat tilt down abit

 :-k i thought that was the rust hole in the boot doing that normally lol :dance:

Title: Re: dickie seats
Post by: Guardian. on January 31, 2008, 17:11:31

I KNOW WHERE THERS A NICE COMPLETE LEATHER SET WITH THE DIKIES AVAILABLE IF ANYONES INTERESTED, LET ME KNOW AND I WILL GO SEE HIM.
IF HES STILL GOT THEM, NOT MUCH SPLASH WILL BUY THEM!