Mud-club
Vehicle & Technical => Range Rover => Topic started by: Wolfie_ on February 06, 2008, 16:26:53
-
I bought some bucket seats to go in the rangie but they didnt come with any runners. Im guess other people have put buckets in theirs so what runners did you use? I modified the drivers runners off the old seat but doesnt leave much room between the seat and steering wheel for getting my legs in and and out. I know what ever I get will need modding but thats not a problem but just interested what others have done
(http://img4011.photobox.co.uk/68990804e7e54155ca921678c9fa276a892f5560ebb467b22d48f84f0be5d7989dcbb02d.jpg)(http://img4011.photobox.co.uk/50744628019ab1fe0148bbd1a256c9e20d8359e678ead72e350c65f6946265b37c054548.jpg)
(http://i16.ebayimg.com/02/i/000/d4/aa/3722_1.JPG)
-
the seat was to close to the wheel So I bought some granada seat runners and have refited the drivers seat using these. Was quite an easy job, had to cut off some brackets on one runner and drill some new holes and swaped some braket over from side to side to get things to line up, but seat sits in a much lower useable position so if anyone thinking of putting seats in granada runners are the one to get. Ill take some pictures in day light