Mud-club

Vehicle & Technical => Defender => Topic started by: Stan 90 on February 10, 2008, 16:10:47

Title: Body Swap
Post by: Stan 90 on February 10, 2008, 16:10:47

Hi guys,

Just changing my chassis over as my old one is shot  :shock:

Wondering if it is possible to remove the bulkhead, doors, rear tub, seat box floor and truck cab roof in one  :-k

I really don't want to strip in down into bits as all the floor, seat box screws etc are rusted. (I know how much of a arse this is as I'm doing a restoration 90 to)

Any tips/advice would be great.

Title: Re: Body Swap
Post by: Guardian. on February 10, 2008, 17:35:14

i think thats probably the easiest way to do it,just make sure everything is disconected whilst lifting the body from the chassis, and when putting down onto new chassis,nothing gets trapped.

Title: Re: Body Swap
Post by: Stan 90 on February 20, 2008, 21:36:31

Well it can be done   :D

(http://i235.photobucket.com/albums/ee251/Jen_and_Tris/Other%20pics/LandieLift.jpg)

Title: Re: Body Swap
Post by: stuvy on February 23, 2008, 19:15:44

looks like a good idea there mate, shame i couldnt do it to a starlet drift car iv just built!!