Mud-club
Vehicle & Technical => Discovery => Topic started by: craigiow on February 19, 2008, 20:03:04
-
will a 300tdi gear box fit a 200tdi engine ? reason I ask is might be able to get hold of a decent 200 tdi engine and wondering how easy it would be to fit into my 300tdi
-
There are two manual boxes, LT77 & R380. Both will fit either a 200 or 300 tdi engine
-
Excellent cheers ,
any idea what other bits need to be swapped across or is it a nice easy straight swap
-
Don't know what, if anything, you need to do, but my 200 has the R380 box. :dance:
-
Get the "spare" as compltete as you can, I'm not sure if the transfer box selector bracket is the same :-k
-
Everything is the same..., the only difference is the position of the reverse gear. LT77 is left and forward, R380 is......, somewhere else....
-
Everything is the same..., the only difference is the position of the reverse gear. LT77 is left and forward, R380 is......, somewhere else....
Back and right :clap:
-
sounds good , will have access to most of the old truck so can get any bits needed to swap it ocer
-
Everything is the same..., the only difference is the position of the reverse gear. LT77 is left and forward, R380 is......, somewhere else....
Back and right :clap:
That's it, right and back ;) ;)