Mud-club
Vehicle & Technical => Discovery => Topic started by: hrox on March 09, 2008, 13:29:01
-
hey all, Any ideas how you remove the Disc 1 spare wheel carrier? i have gone to undo te bolts and once lose they just dont seem to want to come out... all 6 of them. I was wondering if theres any bolts on the inside of the door before i go ripping the interiour out to get at what might not be there that and the fact it will break the second i tug on it!
Thx in advance
-
I think you have to take the trim off the door and work from the inside
Steve
-
Yes there are nuts on the inside that spin, pop off the door card
-
yup whip off all the trim on the inside and snap alllllllllll them little placky pegs :doh: but lol dont worry u can get em from you local motor factors for pennys
-
Do it on a warm day and prise the pegs off with a paint scraper.
-
yep door card off, ask a mate to hold the spanner on one side while you use one on the other. much easier.. ;)
-
thx for the advise guys. will be happy to snap off the plastics now i know i can get replacements for cheap!
-
Don't bother replacing them, just go for a chequer plate rear door card!
-
try and save the origanal ones if you can the replacements are a little bit smaller and not as secure but will do the job but if can reuse old one that will be best