Mud-club

Vehicle & Technical => Discovery => Topic started by: muddydisco on March 28, 2008, 16:25:02

Title: Discovery front footwell
Post by: muddydisco on March 28, 2008, 16:25:02

Are they prone for leaking water down the bulk head and soaking the sound proofing on the offside front well :?

Title: Re: Discovery front footwell
Post by: meader on March 28, 2008, 17:05:06

mine has always done it untill i took the wings off and welded it but make sure you remove the sound profing as i didnt and had a big fire doh

Title: Re: Discovery front footwell
Post by: Range Rover Blues on March 28, 2008, 18:07:05

Also windscreen leaks will end up there.

Title: Re: Discovery front footwell
Post by: J B on March 28, 2008, 19:32:13

look at the top of the bulk head around the heater vent inlet any rust around there will let water in, and will end up on the footwell floor

i just squirted a load underseal around it and no more leaks  :dance:

Title: Re: Discovery front footwell
Post by: Range Rover Blues on March 28, 2008, 19:37:29

I did that with a tiny hole in the hing base on my LSE, now I've got a carpet of pine needles in there instead :roll:

Title: Re: Discovery front footwell
Post by: hobbit on March 29, 2008, 18:56:50

Have a look behind the o/s wing where the aerial co-ax goes through the bulkhead see if the grommet is still there