Mud-club
Vehicle & Technical => Defender => Topic started by: spud the king on April 03, 2008, 10:53:43
-
would Castor correction armes front and back for 2inch lift off a 200tdi disco fit a v8 110 csw as i have a set that never got fitted as did not need them on the disco now got 110 ( disco now sold ) cos i will be lifting the 110 2 inch in time
-
rears yeas, fronts may not, depends on the tickness off the radius arms are where the two bushes are (where they connect to the axel) twos ways to find out, measure or try them.
-
IIRC the Defedner ones are narrow bushes like the older RRC, so yours may not fit.
Which type of arms are they and what condition are they in :-k
-
3 degree for 2" lift brand new never fitted and got polly bushes to
-
Well I've got a pair of QT arms (are your the same?) for a Defender, almost new with OEM rubber bushes in them, for a 200TDi Defender axle.
Thing is, I don't have a Defender.
I know the bushes are different, but are the arms different too?
Want to swap?
-
not thort about it yet will let you know cos the lad thats got my old disco may whant them but have got you in mind
-
Well if you have a pair for a Disco you don't want because you have a Defender, and I have a pair for a Defender that I don't want because I have a RRC, strikes me we could help each other out :D
-
ok the next time i go over to sutton n ashfild i will give you a shout it wont be till end off the mounth and we can meet up
if thats ok
-
No problem, I have way too much to do in the next few weeks to think about fitting them so I'm in no hurry at all.