Mud-club

Vehicle & Technical => Defender => Topic started by: flash42 on April 20, 2008, 17:38:14

Title: budget diff guards
Post by: flash42 on April 20, 2008, 17:38:14
are there any budget diff guards out there, being a student im looking to get as good as i can, but im on a tight budget.
can anyone recomend one for 20 quid or under.

cheers

flash
Title: Re: budget diff guards
Post by: Range Rover Blues on April 20, 2008, 17:47:07
Try Flea aby, someone has copied the Qt and they are £20 something.
Title: Re: budget diff guards
Post by: clbarclay on April 20, 2008, 18:06:11
The clamp on style which fit onto the existing diff pan are good at protecting the thin pan from damage and are the least expensive style of bolt on guard, though after using one for a while my diff pan cracked round the weld. Some people have had these come off the pan, though I never had this problem and the ones I had were  pretty cheap at about £15 each new.

If you have access to a welder then a potentially cheaper option is to fit a pipe/cylinder end cap. This is what I've just done, partly due to the existing one being cracked. Its a bit of work and requires fabrication, though the cost of the ends caps were just £10 each.
Title: Re: budget diff guards
Post by: cotefarmboy on April 20, 2008, 18:24:30
Got mine here

http://www.mm-4x4.com/diff-guard---defender---discovery-mk-1---classic-rr---series-2650-p.asp

Good kit and cheap too, also got a lift kit and snorkel from them as they were the cheapest by far.
SimplePortal 2.3.5 © 2008-2012, SimplePortal