Mud-club

Vehicle & Technical => Defender => Topic started by: William on April 22, 2008, 13:50:41

Title: general grabbers
Post by: William on April 22, 2008, 13:50:41

Hi guys just wondering what the best pressure to run general grabbers on, they are on freestyle alloys? Thanks, btw there on 35psi atm cheers, william

Title: Re: general grabbers
Post by: Range Rover Blues on April 22, 2008, 19:51:43

Follow the advice in the handbook.

Title: Re: general grabbers
Post by: William on April 22, 2008, 19:57:04

lol if i had a handbook i wouldnt be asking, any suggestions?

Title: Re: general grabbers
Post by: Range Rover Blues on April 22, 2008, 20:15:45

SOme handbooks are on the RAVE CD, if I get chance I'll look

Title: Re: general grabbers
Post by: Jimbo on April 22, 2008, 20:38:51

For all tyres the handbook says:

Normal operating conditions, front 28lb/ft (1.9 bar), rears 38lb/ft (2.6 bar)

Vehicle fully loaded to max gross vehicle weight, front 28lb/ft, rears 46lb/ft (3.2 bar)

I've just replaced my BFG AT's with Grabber AT2's, and am having a fun time trying to find a 'comfortable' pressure to run them at for A road/motorwy driving.

The pressures quoted above are for a Disco2 ( :doh:), Defender pressures are similar, fronts are always 28lb/ft (except the 130 which runs at 44lb/ft), rears are 35, 40, 48 or 65lb/ft depending on whether you have a 90, 110 or 130