Mud-club
Vehicle & Technical => Range Rover => Topic started by: gnasha on April 23, 2008, 14:54:14
-
iam fitting range rover axels to my 90 build but not sure what year or pipe fitting's the front axel takes i no i going to need to get a 5 piece hose set as the calipers have twin feed the calipers are lockheed 3247-837c and 3247-838c any idea's
-
You could just swap the callipers over form your 90 as they used the same casting and mounting points. Ealry RRC were imperial, later were metric AFAIK. How old are you axles?
-
the 90 has the original axel's from 1984 and rangy one no idea
-
If it has 7 bolt swivles it will be metric, but either way you can use the 90 callipers.
-
had a go at old calipers and there staying put when i got the mud and rust away from the bolts there was nout to put spanner to and the rest of the caliper is rusted right up
so its back to the other calipers and finding out what pads they take
as for the feed i was thinking of taking the single flexi pipe down to bracket then splitting with T connector to the 2 feeds cant see it being a prob with mot as brakes will still work