Mud-club

Vehicle & Technical => Defender => Topic started by: MudRat on July 02, 2008, 19:34:26

Title: Where do I get a wide yoke prop?
Post by: MudRat on July 02, 2008, 19:34:26
My defender has a 3" lift, it has all the correct castored arms etc, but i need a wide angled yoke prop or a cardon one, where do i get one from??
Title: Re: Where do I get a wide yoke prop?
Post by: Tommo on July 02, 2008, 19:44:38
IIRC early range rovers hade a wide angle prop if that helps.
Title: Re: Where do I get a wide yoke prop?
Post by: Bob696 on July 02, 2008, 20:30:10
Kensons in wendsbury sell them. Thats where I got mine from. They seem to do all the shows.
Title: Re: Where do I get a wide yoke prop?
Post by: benbenukuk on July 02, 2008, 20:53:40
scorpion racing do them http://www.scorpionracing.co.uk/  Ben
Title: Re: Where do I get a wide yoke prop?
Post by: TDi90 on July 02, 2008, 21:25:49
devon 4x4 ! why look any further?!
and dont DONT buy from scorpion.
R
Title: Re: Where do I get a wide yoke prop?
Post by: trickydicky on July 05, 2008, 12:04:14
did you miss the one on ebay aswell then?
Title: Re: Where do I get a wide yoke prop?
Post by: davidlandy on July 05, 2008, 14:48:08
get a normal yoke prop and arrange a meeting with Mr A.Grinder.

Title: Re: Where do I get a wide yoke prop?
Post by: burgerman on July 05, 2008, 16:48:34
www.challenger4x4.co.uk  :D
Title: Re: Where do I get a wide yoke prop?
Post by: Les Henson on July 06, 2008, 09:19:41
I got my wide angle props from the Propshaft Clinic.


Les.
Title: Re: Where do I get a wide yoke prop?
Post by: Rasbo on July 07, 2008, 16:35:36
just got a quote through from prop clinic for my 90 with 3" lift

Quote
Hello.
Thanks for your enquiry.
The price to make a front and rear wide angle propshaft with 30 degree flanges & yokes & 70mm travel on slider & h/duty u/joints will be ; £125.00 ea + vat.+ £12.00 carriage turn round time is usually 48 hours from order.
all i need from you is a measurement between the diff flange & the g/box flange & i will make the propshaft to the correct working length..

cheapest place i've found and a good reputation too.  Also you know its made specificaly for your vehicle not one of these one prop fits all jobbies :D

A
Title: Re: Where do I get a wide yoke prop?
Post by: MudRat on July 08, 2008, 19:02:11
where is that from? I have a rear one for £155 delivered from Devon 4x4 (excellent service BTW) but need a front one.
Title: Re: Where do I get a wide yoke prop?
Post by: Rasbo on July 11, 2008, 22:56:46
that was from propshaft clinic, made to length.
Title: Re: Where do I get a wide yoke prop?
Post by: Eeyore on July 14, 2008, 09:45:12
You'll be wanting a 'double-cardan' prop, not a wide yoke one  ;)

For my money, I'd go to Dave Mac Propshafts in Coventry and get one from him, it'll propably be custom made for you, and it'll be less than half the price of SR.

Propshaft Clinic are good too, it's just that DMPS will be nearer to you.

Cheers
Eeyore
Title: Re: Where do I get a wide yoke prop?
Post by: bertie_bas205 on July 17, 2008, 07:10:34
I got mine off a 110 300 TDi defender.... Island 4x4 do them for about 70 buck plus postage.



Bertie.
Title: Re: Where do I get a wide yoke prop?
Post by: Eeyore on July 17, 2008, 07:59:26
I got mine off a 110 300 TDi defender.... Island 4x4 do them for about 70 buck plus postage.

I doubt it's wide yoke or DC off of that vehicle, or at that price.  :(
Title: Re: Where do I get a wide yoke prop?
Post by: bertie_bas205 on July 17, 2008, 08:07:28
Give em a fone...........




http://cgi.ebay.co.uk/LAND-ROVER-DEFENDER-90-110-300-TDI-FRONT-PROPSHAFT_W0QQitemZ320072772920QQcmdZViewItem?_trksid=p3286.m20.l1116


Bertie
Title: Re: Where do I get a wide yoke prop?
Post by: freeagent on July 17, 2008, 13:24:30
Another vote for Propshaft clinic, I had one of their props on my old 110... the quality was superb.... ;)
Title: Re: Where do I get a wide yoke prop?
Post by: Tommo on July 17, 2008, 19:12:31
Give em a fone...........




http://cgi.ebay.co.uk/LAND-ROVER-DEFENDER-90-110-300-TDI-FRONT-PROPSHAFT_W0QQitemZ320072772920QQcmdZViewItem?_trksid=p3286.m20.l1116


Bertie

Thats not wide angle.
SimplePortal 2.3.5 © 2008-2012, SimplePortal