Mud-club

Vehicle & Technical => Discovery => Topic started by: mentalmoshio sophs V8i on July 05, 2008, 09:07:06

Title: metal panels
Post by: mentalmoshio sophs V8i on July 05, 2008, 09:07:06

seen some really neat kick panel and other dash bits for defenders was wondering is there anything for discos in stainless steel or alloy plate anywhere for sale or made  :-k

Title: Re: metal panels
Post by: petergalileo on July 05, 2008, 16:54:25

Theres a place in Colchester whch not only does the wood dash kit fot all model discoveries but they also apparently do the exact same panels in brushed alluminium and carbon fibre.   I also saw a discovery about 5 years ago which had all the interior door cards replaced with chequerplate.

Peter

Title: Re: metal panels
Post by: mentalmoshio sophs V8i on July 05, 2008, 19:20:54

full panel of checkerplate for door trim on the front maybe not,  lower half maybe. the devon animal looks good with that

Title: Re: metal panels
Post by: mentalmoshio sophs V8i on July 12, 2008, 20:01:23

i think i may have an idea 

a pillar gauge holder  45 deg exhuast tube on flat stainless plate black

is it possible to do photobucket mock up

Title: Re: metal panels
Post by: Ja1983 on July 12, 2008, 23:26:03

guage holder.... easiest way would be squareline fall pipe (or similar) and a 52mm hole saw... may be a bit chunky for the pillar like!