Mud-club

Vehicle & Technical => Defender => Topic started by: gnasha on July 11, 2008, 19:49:45

Title: torque settings
Post by: gnasha on July 11, 2008, 19:49:45

Any one no the torque settings for the 3 bolt plate on the Trailing Arms as my first bolts i did to tight and [!Expletive Deleted!] the bolts

Title: Re: torque settings
Post by: clbarclay on July 11, 2008, 20:09:14

Are those the 3 short M10 bolts (or imperial equiverlant?) holding the bush to the chassis?

As far as I'm aware there is no specific torque for these so use just use standard torque, which as you already know is not BFT. For a high tensile M10 bolt the torque to do them up is 50Nm.