Mud-club

Vehicle & Technical => Defender => Topic started by: flash42 on July 11, 2008, 20:44:08

Title: looking for a company that sells prebent axhaust angles
Post by: flash42 on July 11, 2008, 20:44:08

looking for a company that provides pre bents angles to fabricate my own straight through exhaust for my defender.
also has anyone got experience with flexible metal exhaust tubing for the same job.

cheers

flash

Title: Re: looking for a company that sells prebent axhaust angles
Post by: Mark_Solesbury on July 11, 2008, 21:09:30

if you got a 90, get a late 300tdi back section.

Its a straight though pipe thats pre bent over the axle etc.

Then all you need is to make a mid section, which is a straight section about 70cm long.

Title: Re: looking for a company that sells prebent axhaust angles
Post by: flash42 on July 11, 2008, 21:28:18

im looking to have a side exit exhaust, coming out behind the passenger door.

Title: Re: looking for a company that sells prebent axhaust angles
Post by: V8MoneyPit on July 12, 2008, 10:45:06

How about http://www.jetex.co.uk/.

I've bought bends, straights and silencers from them on a couple of occasions.

The 'bits' section is here:
http://www.jetex.co.uk/website/custom_parts.php

Title: Re: looking for a company that sells prebent axhaust angles
Post by: andyb on July 12, 2008, 15:06:44

Can always chop up a few exhausts off scrappers. Should be cheap as chips :)

Title: Re: looking for a company that sells prebent axhaust angles
Post by: bertie_bas205 on July 17, 2008, 07:13:43

Think Demon Tweeks do em........



Bertie.

Title: Re: looking for a company that sells prebent axhaust angles
Post by: ian_s on July 20, 2008, 00:40:15

i used the jetex parts mentioned above, and they are brilliant :)
the parts are well made, and clamp together really well

Title: Re: looking for a company that sells prebent axhaust angles
Post by: Saffy on August 04, 2008, 11:04:33

There is web/mail order and normal walk-in shop at Castle Combe race track call merlinmotor sport. They do prefab exhaust sections. (They expect race sponsors to be forking out cash so NOTHING is cheap) http://www.merlinmotorsport.com/

Title: Re: looking for a company that sells prebent axhaust angles
Post by: V8MoneyPit on August 04, 2008, 11:21:12

I seem to remember Merlin are a Jetex supplier, so you might as well go straight to Jetex.

Title: Re: looking for a company that sells prebent axhaust angles
Post by: ian_s on August 07, 2008, 16:23:13

i bought my jetex parts from merlin motorsport, as once i had priced everything up, it was cheaper to buy from merlin
i was also buying other parts i could only get from merlin, so that might have tipped the balance