Mud-club

Vehicle & Technical => Defender => Topic started by: scatt on July 16, 2008, 10:27:38

Title: 35's on defender 110 double cab
Post by: scatt on July 16, 2008, 10:27:38

HI there guys and gals, im looking at new set of wheels and tyres. my truck has 2" lift and am looking at 35x12.5x15 bfg mud terrains on 10x15 modulars, is any one running 35's and if so how well do they fit! i know i will need to mod the arch spats but is there anything else i should be looking at changing or moding. all advise will be very much appreciated!![/color]

Title: Re: 35's on defender 110 double cab
Post by: Mr Bump on July 16, 2008, 17:46:32

You'll lose a fair bit of turning circle!  Wheel spacers will get most of that back, I have the QT ones on mine which are V heavy and solid looking, not sure I'd quite trust the alloy ones

Title: Re: 35's on defender 110 double cab
Post by: Mr Bump on July 16, 2008, 17:48:19

just re read your post, you might need to replace the arches with wider ones rather than modding the existing.... I assume you mean trimming them to prevent rubbing when flexing?

Title: Re: 35's on defender 110 double cab
Post by: scatt on July 16, 2008, 19:41:54

yes mate buy moding i mean trimming them to stop rubbing. do you run 35's ? if so could you post or pm me a pic. thanks

Title: Re: 35's on defender 110 double cab
Post by: HiFonics on July 16, 2008, 20:15:48

To be legal you need wider arches like these.

http://www.devon4x4.com/component/option,com_shop/Itemid,67/sitelang,en/mode,productview/product,542/cat,177/showcaticons,yes (http://www.devon4x4.com/component/option,com_shop/Itemid,67/sitelang,en/mode,productview/product,542/cat,177/showcaticons,yes)

Ben