Mud-club

Vehicle & Technical => Defender => Topic started by: WHITE WHULF on July 20, 2008, 09:18:41

Title: Bearmach or Britpart
Post by: WHITE WHULF on July 20, 2008, 09:18:41

Hi all :)

Thanks in advance for taking a couple of minutes to read this. Its been a while since I've been on these forums, change of circumstances has prevented me from doing much off roading this year :( Hopefully will be back into it this year, which brings me to the point (Finally :P)

I have just discovered that I need to replace the rear X member on my 1984 90, the nearside rear body mount has completely collapsed and there is a large hole in the chassis where the mount used to be welded on, the rear faces of the X Member are also starting to badly corrode (N/S worse than O/S but both pretty bad)

I've found several very good and detailed explanations on various forums on how to replace the X Member itself but my question is which should I buy? Is the Bearmach one better the Britpart one, or are they both the same part?


Thanks

Whulf

Title: Re: Bearmach or Britpart
Post by: CJ on July 25, 2008, 11:46:10

Hi mate, from my experiance of selling both Britpart and bearmach, i would go for the bearmach part.  They are both different... the Britpart ones do have a nicer paint finish but the BM ones seem to be constructed better..and fit  :lol:

Hope this helps,

Cheers Chris  :afro: