Mud-club

Vehicle & Technical => Defender => Topic started by: MudRat on July 30, 2008, 18:27:13

Title: Side Exit 90 exhaust
Post by: MudRat on July 30, 2008, 18:27:13

I would like a side exit exhaust of my 300tdi 90, its fitted with a lt77 box and has a disco centre pipe mated onto a 90 back, asked for a quote from a local fabricators for the straight thru from the bottom manifols, the 90 degree turn and small silencer and exit, they said approx.......................£500-600,  :shocked: i said thanks and left sharpish, anyone offer suggestions? only looking at spending £100!

Title: Re: Side Exit 90 exhaust
Post by: biggerlandy on July 30, 2008, 18:47:48

gwyn lewis do a good one

Title: Re: Side Exit 90 exhaust
Post by: kizz81 on July 31, 2008, 13:32:47

gryphen performance do some nice ones, i was browsing around at billing but they havnt invented one for my 200 yet  :evil:

Title: Re: Side Exit 90 exhaust
Post by: bigfatsi on July 31, 2008, 14:33:40

I went along to my local exhaust place, 'Exhaust-a-fix' and they made me one for £100 (Disco 200Tdi in 90). It has no silencers or anything and exits just in front of the n/s rear wheel.

Pics:

(http://best4x4xfar.com/gallery/albums/userpics/10052/PICT0001~4.JPG)

(http://best4x4xfar.com/gallery/albums/userpics/10052/PICT0003~4.JPG)

It's fruity at full chat but not excessively so. Turbo spins up quicker but I think it seems to have lost a bit of pull further up the revs. I can get a pic of it off the car if that would help? It's currently in bits in the garage!

Simon.

Title: Re: Side Exit 90 exhaust
Post by: V8MoneyPit on July 31, 2008, 16:45:53

Or make your own with bits from Jetex. That's what I did with the 110.

Title: Re: Side Exit 90 exhaust
Post by: Xtremeteam on August 01, 2008, 13:15:48

Quote from: kizz81 on July 31, 2008, 13:32:47

gryphen performance do some nice ones, i was browsing around at billing but they havnt invented one for my 200 yet  :evil:

my 200 should be the test bed for there 200tdi system :afro:

Title: Re: Side Exit 90 exhaust
Post by: suggs on August 01, 2008, 22:26:31

had mine made by Pipecraft in Essex, was £80 fitted plus i got a D44 finishing plate was about 20 quid i think...

(http://i32.photobucket.com/albums/d43/karting4/Defender/a1-93.jpg)

(http://i32.photobucket.com/albums/d43/karting4/Defender/a1-94.jpg)