Mud-club

Vehicle & Technical => Range Rover => Topic started by: Dave_ on August 26, 2008, 18:47:42

Title: indicator problem
Post by: Dave_ on August 26, 2008, 18:47:42

when i indicate right, all flashes as normal until i put my foot on the brake, then the indicator stops and the brake flashes?
iv taken the right light pod off, there doesnt seem to be any corrosion, but a couple of the bulbs have gone black at the top  but the filament hasnt broken...is that the problem??  any other ideas?

Dave

Title: Re: indicator problem
Post by: Frankie-Boy on August 26, 2008, 20:05:08

I'd say you have an earthing problem there.

Title: Re: indicator problem
Post by: Dengie Boy on August 26, 2008, 20:07:54

Sounds like it could be an earthing problem, probably a dirty connection.
If its a classic, I think the earth connection for the rear lights is on the drivers side up high above the headlining.

Title: Re: indicator problem
Post by: Dave_ on August 26, 2008, 20:15:04

hmmm   so remove headlining, sounds fun
is it an easy job?

Title: Re: indicator problem
Post by: ben_haynes on August 26, 2008, 23:35:04

i had a similar problem with my disco, and all i made was a new earth link cable for both rear lights, by putting a screw through the rear metal with an eye terminal on the link cable then screw the other end in to the body behind the cluster

Title: Re: indicator problem
Post by: Dave_ on August 27, 2008, 13:26:53

well.... it turned out 1 of the plugs was loose!    so that was and easy fix  :dance: