Mud-club
Vehicle & Technical => Discovery => Topic started by: bambamjj on September 18, 2008, 07:00:03
-
Need to do an oil change tonight as the fuel pump had gone and looks like diesel was topping up the engine oil [-o<
What grade do you all use/recommend for a 120K 300 tdi.
Your help once again is appreciated.
-
I would suggest 15/40.
Les.
-
Cheers Les :D
-
Recommended oil is 10w 40!
http://www.castrol.com/castrol/iframe.do?categoryId=9024084&contentId=7044829
-
i'm pretty sure for turbo diesels it is 15/40. what what i use in my 200tdi
-
Get some MIllers XFE in it a semi sythetic 15/40 fantastic stuff use it in all mine and have done for years. You can buy on line from Millers direct
http://www.millersoils.net/1_Millers_frame_AUTO_RETAIL.htm
-
New engine oil spec is 5/30 fully or semi-synthetic. After 120k miles it would be wise to use something thicker, but still within the recommended range. 15/40 is a very good average spec oil for turbo diesel engines. If you have a high-miler and put 5/30 in, then engine noise might make you panic a bit :)
Les.
-
I use Lucas oils 10/40 with their oil stabiliser, or a 15/40 in summer.