Mud-club
Vehicle & Technical => Discovery => Topic started by: Boon101083 on September 29, 2008, 11:03:55
-
Hi all,
I have heard somewhere that the Rang Rover Inner Wing Repair Panels will fit the Disco 1, is this correct? I am in need of a replacement inner wing panel and can only find Rangie ones.
Can anyone confirm or deny this?
Thanks
Si
-
Hi Boon..
I have the same problem with my 300tdi disco...Paddocks have some inner front wings..but im thinking YRM Metal-solutions.com would be much better..hope this helps..steve
-
Yes mate they are, however they differ half way up, where the box section 'rib is, so if your metal is ok over that point it should just be a case of trimming the repair panel to suit.
-
Hi, i used RRC inner wings from paddock and trimmed the RR headlamp boxes off and used the disco ones, they fit perfectly
(http://img.photobucket.com/albums/v11/Kevinsharp/bobtaildisco010.jpg)
(http://img.photobucket.com/albums/v11/Kevinsharp/bobtaildisco009.jpg)
(http://img.photobucket.com/albums/v11/Kevinsharp/bobtaildisco011.jpg)
(http://img.photobucket.com/albums/v11/Kevinsharp/bobtaildisco013.jpg)
(http://img.photobucket.com/albums/v11/Kevinsharp/bobtaildisco014.jpg)
:)