Mud-club

Vehicle & Technical => Range Rover => Topic started by: Oli-L on October 01, 2008, 16:08:34

Title: Transfer box...
Post by: Oli-L on October 01, 2008, 16:08:34

Had to take mine out the other day as in process of changing gearboxes, and noticed that on the inside there was like little tiny pieces of wot looked bronze flakes just on the inside of the seal.. Anybody shed any light on wot it is?? And should i be worried?? Or just stick it back together and pretend i saw nothing....!!  :wink: :smiley:

Title: Re: Transfer box...
Post by: Range Rover Blues on October 02, 2008, 00:11:17

Bronze bits, sounds like a bearing breaking up.  If it were the gearbox I'd suspect syncro rings or baulk rings.  Check the hi-lo selector mech for chunks missing on the teeth.

BTW, which T-Box?

Title: Re: Transfer box...
Post by: Oli-L on October 03, 2008, 08:57:51

Im not sure, i know its got diff lock if that helps!! Its currently down a mates unit im popping down there some time over the weekend i'll hve a look and let you know.....

Title: Re: Transfer box...
Post by: Range Rover Blues on October 05, 2008, 12:27:30

LT230 then