Mud-club
Vehicle & Technical => Suzuki => Topic started by: Lumbering Jack on October 07, 2008, 06:59:47
-
Other than going to a normal motor factors, where's the best place for bushes etc for a jimny? Quite fancied poly bushing it but haven't been able to find anything like that advertised anywhere yet - anyone got any ideas? :-k
-
I presume you mean Radius Arm bushes, the shock absorber bushes are easy to get hold of polybush equivalents. When my rear radius bushes needed changing I could not find anywhere that did replacement bushes, although since then offroad-armory (http://www.offroad-armory.com) and rhinorays (http://www.rhinorays.co.uk) both advertise them (and a lot cheaper than I paid for them :doh: )
Two things to note:
1. Looking on www.jimny.se the general opinion is that you get better flex with proper Suzuki bushes. The original bushes have slots cut in them that allow a lot of movement - solid polybushes will not do this and will produce a rougher ride as well (Some people in Oz and Asia have fitted polybush style bushes)
2. They are bl**dy hard to remove. In the end I had to get them to a friendly garage with a large press. Apparantly as the gauge on the press went through 35 tonnes people started to leave the workshop to stand outside. At 38 tonnes there was a loud bang and the bush came out, not something you can do at home.
See HERE (http://www.bigjimny.com/index.php?view=article&id=109%3A19708-rebuilding-the-trailing-arms&option=com_content&Itemid=37) for my article on changing them
Have fun
Martin
-
sit down super pro do them but the price is a bit steep (i last asked at donninton and the reply to the sales staff was i only want the bush kit ive allready got the shock/springs and new radius arms)
and im sure darren at kap do them
-
Thanks guys, panic over for the moment - it somehow went straight through the mot so I can chip away when I get chance :dance: