Mud-club

Vehicle & Technical => Discovery => Topic started by: Big Rich on October 19, 2008, 19:33:20

Title: 300 disco break problem
Post by: Big Rich on October 19, 2008, 19:33:20

Hi all,

A mate of mine has a 50th eddition 300 disco auto.

The breaks work fine normally but if you need to break hard for any reason the break pedal fade's down.
From what he said the disco still stopps.

Could this be the marster on the way out?


Rich

Title: Re: 300 disco break problem
Post by: Disco_Stu on October 19, 2008, 19:47:59

It could be, yes. I'd check all pipes and unions first tho, could be leaking from somewhere easy to fix. If everythings dry, I'd put money on the master cylinder.

Stu.

Title: Re: 300 disco break problem
Post by: peasey on October 19, 2008, 20:22:55

I would agree with stu on this one,i did for a moment think vac pump but they just tend to get louder and louder and then not work

Title: Re: 300 disco break problem
Post by: Big Rich on October 20, 2008, 22:59:16

Thanks Guys. I'll have a look tomorrow.