Mud-club

Vehicle & Technical => Discovery => Topic started by: Banjo on November 20, 2008, 08:45:56

Title: Washer bottle
Post by: Banjo on November 20, 2008, 08:45:56

Does the washer bottle on a 200tdi sit on studs or nut and bolt :(, I need to remove it to clean it as there appears to be something growing in it, that keeps blocking the jets.

Title: Re: Washer bottle
Post by: solihull-mick on November 20, 2008, 09:03:07

Hi should be held in place with 3 bolts, all going down bank into the inner wing,

Title: Re: Washer bottle
Post by: Banjo on November 20, 2008, 09:33:58

Cheers Mick, if they are rusted to bad plan B is the pressure washer in the bottle, if that fails plan C is remove the jet,  extend the pipe and cable tie it to the wiper arm :D.