Mud-club

Vehicle & Technical => Discovery => Topic started by: landymad on November 20, 2008, 10:50:33

Title: Changing engine
Post by: landymad on November 20, 2008, 10:50:33

ive brought another 200tdi disco purely for the engine as mine seems to be knacked.

the new disco ive brought is an auto and mine is a manual. can the engines be swapped.

i no the flywheel housin might need to be change and the clutch.

i was just wonderin if it would work?

cheers

sam

Title: Re: Changing engine
Post by: solihull-mick on November 20, 2008, 11:37:20

Hi yes the engine can be used with no problems, remove to flex plate from the auto engine, fit the flywheel as normal, you will have to fit a crank pilot bearing in the end of the crank, as the auto engine will not have one, also remove the kick down lingake from the injection pump, job done,

Title: Re: Changing engine
Post by: hobbit on November 20, 2008, 18:53:23

Or go the whole hog and drop the lot in, engine & box, you have any bits you may need for the conversion, and have an idle life :)