Mud-club

Vehicle & Technical => Discovery => Topic started by: TDi.Si on November 23, 2008, 19:31:10

Title: Fitting 300 front to a 200
Post by: TDi.Si on November 23, 2008, 19:31:10

My disco is a bit battered at the front. I have a frontend off a 300tdi in my stores! The mounting holes don't line up, so I wondered if anyone has a template for the holes in the front pannel they could scan and pm me?

Title: Re: Fitting 300 front to a 200
Post by: Range Rover Blues on November 23, 2008, 20:20:00

Easiest is to cut a pair of backplates form a 300 and weld them into place.

Title: Re: Fitting 300 front to a 200
Post by: TDi.Si on November 23, 2008, 21:33:09

Thats what I want to do, just need to find a breaker!

Title: Re: Fitting 300 front to a 200
Post by: landymadjay on November 23, 2008, 22:22:54

300 fronts are so much better

when i did mine and my mates we just sort of judged it as they are not goin back on the road and they turnt out ok .

(http://i271.photobucket.com/albums/jj125/RANGEROVERV8_92/DSC01214.jpg)
(http://i271.photobucket.com/albums/jj125/RANGEROVERV8_92/08112008718.jpg)

Jay

Title: Re: Fitting 300 front to a 200
Post by: mr_disco on November 23, 2008, 23:02:14

hi lads i got 2 backing plates from a 300tdi layin here just thinking about it,, give me a pm